User's Manual

18G 4x1 Presentation Switcher with Soft Codec & Wireless BYOD
21
Command
Description
Command & Feedback
Example
#SET_H_OF_[PARAM1]_
[PARAM2]:XX XX
Set the HEX RS232 command XX XX to be
sent to control the third-party device when
the DISPLAY OFF button is pressed.
⚫ [PARAM1] = 00~06 (Baud Rate)
00 - 115200
01 - 57600
02 - 38400
03 - 19200
04 - 9600
05 - 4800
06 - 2400
⚫ [PARAM2] = 00~99. The delay time of
sending command.
⚫ XX XX: Any HEX code (0-9, A-F; up to 20
bytes. It must have a blank between 2
different XX).
#SET_H_OF_05_30:41
42 43 44 45
@BAUDRATE: 4800
@DELAY TIME: 30 s
@DISPLAY OFF HEX TO
SEND:41 42 43 44 45