User's Manual

18G 4x1 Presentation Switcher with Soft Codec & Wireless BYOD
1
1. Product Introduction
Thanks for choosing the 18G 4x1 Presentation Switcher. The switcher is designed with
one wireless Miracast/Airplay input, two HDMI inputs, one USB-C input and one HDMI
output. It supports HDMI 2.0b, 4Kx2K@60Hz 4:4:4, HDR 10, Dolby Vision, and HDCP
2.2. In addition, there is smart built-in EDID setting can be selected by the 4-pin DIP
switch on the front panel.
The switcher supports HDMI audio de-embedding. It also supports USB device
extension by providing two type-B USB ports for host connection, and two type-A USB
ports for USB devices such as camera, microphone, keyboard etc.
The switcher features multiple methods of control. When at the AUTO mode, the
switcher will automatically switch to the first detected source device. The switcher can
be manually controlled by the front panel buttons and RS232 command. CEC allows
the display device can be controlled by the front panel buttons and RS232 and CEC
commands.
1.1 Features
⚫ 18G 4x1 presentation switcher with soft codec & wireless BYOD.
⚫ Supports HDMI 2.0b, 4Kx2K@60Hz 4:4:4, HDR 10, Dolby Vision and HDCP 2.2.
⚫ Wireless BYOD (Bring Your Own Device) capability via AirPlay and Miracast.
⚫ Provide up to 60w charging, USB data (USB 3.0/2.0) and 4K video transmission on
USB-C port.
⚫ HDMI output audio can be de-embedded out via balanced analog audio port.
⚫ Two type-B USB ports for host connection, and two type-A USB ports for USB
devices like webcam, mic and keyboard.
⚫ Supports video source auto-switching.
⚫ Smart EDID management.
⚫ Front panel buttons trigger both CEC and RS232 commands for display control.