User Manual CHA2 PTN HDMI Audio Splitter/De-embedder 1x2 All Rights Reserved Version: CHA22013V1.3 www.PTN-electronics.
HDMI Audio Splitter/De-embedder 1x2 NOTICE: Please read this user manual carefully before using this product. This manual is for operation instruction only, not for any maintenance usage. The functions described in this version are updated till July 2013. Any changes of functions and parameters since then will be informed separately. Please refer to the dealers for the latest details. This manual is copyright PTN Electronics Limited. All rights reserved.
HDMI Audio Splitter/De-embedder 1x2 Table of Contents 1. Introduction.............................................................................................................1 1.1. Introduction to CHA2 ................................................................................... 1 1.2. Features ...................................................................................................... 1 1.3. Package Contents ........................................................................
HDMI Audio Splitter/De-embedder 1x2 1. Introduction 1.1. Introduction to CHA2 CHA2 is a high-quality HDMI audio splitter/de-embedder, with 1 HDMI and 1 split stereo audio output, HDCP compliant and HDTV compatible. The antistatic case design of CHA2 provides good protection for stable performance, and its transmission resolution ups to 1920*1200@60Hz. 1.2. Features De-embed and split the HDMI audio to two different formats output (1 video output, 1 audio output). HDCP compliant, use HDMI 1.3 standard.
HDMI Audio Splitter/De-embedder 1x2 ① HDMI IN: HDMI input port, used to connect to an HD video source device, such as a DVD player, a computer etc. ② 5V DC: Used to access into a DC 5V power. ③ Power Indicator: It turns red when power on. ④ HDMI OUT: HDMI output port, used to connect to a display device, such as HDTV. ⑤ AUDIO OUT: Stereo audio output port, used to connect with an audio amplifier, such as a speaker. 3. System Connection 3.1.
HDMI Audio Splitter/De-embedder 1x2 3.3. Connection Procedure 1) Connect HDMI IN port of CHA2 with HDMI source device, such as a DVD player. 2) Connect HDMI OUT port of CHA2 with display device, such as an HDTV. 3) Connect AUDIO OUT port of CHA2 with a speaker or earphone etc. 4) Connect 5V DC port of CHA2 with a DC 5V power adapter. 3.4.
HDMI Audio Splitter/De-embedder 1x2 4.2. Product Assortment ① TPHD402 (HDMI twisted pair extender) 70m transmission distance in max over single CAT5e/CAT6 cable. Support 1080P@60Hz,48b/pixels,3D & 4Kx2K. Bi-directional and simultaneous RS232 & IR control. ② SHD2 (HDMI splitter 1x2) HDCP compliant, support 3D. Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC). HDTV compatible with High Definition Transmission resolution up to 1920*1200@60Hz (max), support 1080P.
HDMI Audio Splitter/De-embedder 1x2 5. Specification Video Input Video Output Input 1 HDMI Output 1 HDMI 1 Stereo Audio Input Connector HDMI 1.3 Output Connector HDMI 1.3 3.5mm jack Input Level T.M.D.S. 2.9V/3.3V Output Level T.M.D.S. 2.9V/3.3V 50Ω Output Impedance 50Ω Input Impedance Video General Gain Video Signal Resolution Range CMRR 0 dB T.M.D.S signal HDMI 1.3 Up to 1920 x 1200 or 1080P@60Hz >90dB @20Hz~20K Hz Bandwidth Maximum Pixel Clock Delay Time 6.
HDMI Audio Splitter/De-embedder 1x2 6. Panel Drawing 7. Troubleshooting & Maintenance 1) If the POWER indicator doesn’t work or no respond to any operation: The power adapter is not connected with alternating current power. The power switch is not on. 2) When there is no output signal: Check if the audio/video connector is broken (check with multimeter or oscilloscope). Check if the audio/video connector is well connected. Check if the source device/display device is powered on and turned on.
HDMI Audio Splitter/De-embedder 1x2 8. Safety Operation Guide In order to guarantee the reliable operation of the equipments and safety of the staff, please abide by the following proceeding in installation, using and maintenance: 1) The system must be earthed properly. Do not use two blades plugs and ensure the alternating power supply ranged from 100v to 240v and from 50Hz to 60Hz. 2) Do not put the device in a place of too hot or too cold.
HDMI Audio Splitter/De-embedder 1x2 9. After-sales Service 1) If there appear some problems when running CHA2, please check and deal with the problems reference to this user manual. Any transport costs are borne by the users during the warranty. 2) You can email to our after-sales department or make a call, please tell us the following information about your cases. Product version and name. Detailed failure situations. The formation of the cases.
www.PTN-electronics.com PTN Electronics Limited Tel: +86-755-2846 1819 Fax: +86-755-8471 7796 Email: info@PTN-electronics.com Website: www.PTN-electronics.
