HDMI/IR/RS232 Twisted Pair over Single Cable USER MANUAL TPHD402 PTN HDMI/IR/RS232 Twisted Pair over Single Cable Version: TPHD4022013V1.1 PTN Electronics Limited www.PTN-electronics.
HDMI/IR/RS232 Twisted Pair over Single Cable NOTICE: Please read this user manual carefully before using this product. This manual is for operation instruction only, not for any maintenance usage. The functions described in this version are updated till May 2013. Any changes of functions and parameters since then will be informed separately. Please refer to the dealers for the latest details. This manual is copyright PTN Electronics Limited. All rights reserved.
HDMI/IR/RS232 Twisted Pair over Single Cable Table of Contents 1. Introduction ...............................................................................................................1 1.1. Introduction to TPHD402 ............................................................................... 1 1.2. Package Contents ......................................................................................... 1 1.3. Installation Procedure .............................................................
HDMI/IR/RS232 Twisted Pair over Single Cable 1. Introduction 1.1. Introduction to TPHD402 TPHD402 is an HDMI/IR/RS232 twisted pair including transmitter (TPHD402T) and receiver (TPHD402R). The TPHD402 uses HDBaseT technology to deliver HDMI signal and control signal (IR & RS232), over a single STP cable, max transmission distance up to 70 meters with CAT5e/CAT6 cable. 1.2.
HDMI/IR/RS232 Twisted Pair over Single Cable 2. Features Support Full HD: Delivers high resolution image (1080p@60Hz@48 b/pixels/3D/4Kx2K). Max transmission distance is up to 70 meters over single CAT5e/CAT6 cable. High Bandwidth: 10.2Gps. HDTV Compatible, use HDMI 1.4 and HDCP compliant. Connect with a displayer to transmit EDID and HPD signals constantly by using a CAT5e twist pair. Bi-directional RS232 control. Bi-directional IR control. Use HDBaseT technology.
HDMI/IR/RS232 Twisted Pair over Single Cable Transmission Distance Gain Max distance 70M 0dB ~ 10dB@100MHz Differential Phase Error SNR ±10°@ 135MHz_100M Bandwidth 10.2Gbps Return Lost ＜-30dB@5KHz THD ＜0.005%@1KHz HDMI Standard Support HDMI1.4 and HDCP Min. ～Max. Level Impedance ＜0.3V ~ 1.45Vp-p Temperature -20 ~ +60℃ Humidity 10% ~ 90% Power Supply DC 5V, Power Consumption Case Dimension 6.5W W77xH30x D134 mm W77xH30x D134 mm Net Weight 0.5Kg 0.
HDMI/IR/RS232 Twisted Pair over Single Cable successful. IN: When connected with devices support HDCP and work normally this LED will keep on. If devices not support HDCP, the LED will blink. 3) POWER LED: LED indicator of power. When connect with power, red LED will keep on. 4) TP OUT: Single TP cable connects to TP IN port in TPHD402R. 5) HDMI IN: Connect to HDMI source. 6) IR IN: Connect with IR receiver, the IR signal received from this port can only send out in TPHD402R.
HDMI/IR/RS232 Twisted Pair over Single Cable 6) IR IN: Connect with IR receiver, the IR signal received from this port can only send out in TPHD402T. NOTICE: When there is IR receiver connected to this port, the port (1) will be unavailable. 7) IR OUT: Connect with IR sender, the sending IR signal are received from TPHD402R. 8) RS232: RS232 connector. 9) 5V DC: Connect with power supply. 4.2.
HDMI/IR/RS232 Twisted Pair over Single Cable 5. System Diagram 6. Panel Drawing PTN Electronics Limited 6 www.PTN-electronics.
HDMI/IR/RS232 Twisted Pair over Single Cable 7. Troubleshooting & Maintenance 1) When images of terminal unit output with ghost, such as the projector output with ghost. Generally this is not a unit faulty, this may be caused by an incorrect setting on the projector or a bad quality of cable. Please check the projector’s setting or try another high quality connection cable. 2) When there is a color losing or no video signal output, please check the input and output end connections of the cables.
HDMI/IR/RS232 Twisted Pair over Single Cable connectors loosen. If it is still the same after the above checking, maybe there is something wrong in the extender. Please send it to the dealer for fixing. 5) If the static becomes stronger when connecting the video connectors, it probably due to bad grounding, please check the grounding and make sure it connected well, otherwise it would damage the extender.
HDMI/IR/RS232 Twisted Pair over Single Cable 9. After-sales Service 1) If there appear some problems when running TPHD402, please check and deal with the problems reference to this user manual. Any transport costs are borne by the users during the warranty. 2) You can email to our after-sales department or make a call, please tell us the following information about your cases. Product version and name. Detailed failure situations. The formation of the cases.
