User Manual TPHD405PT-WPI Scaler Wall Plate HDBaseT Transmitter All Rights Reserved Version: TPHD405PT-WPI_2014V1.0 www.PTN-electronics.
Scaler Wall Plate HDBaseT Transmitter SAFETY PRECAUTIONS To insure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference. Unpack the equipment carefully and save the original box and packing material for possible future shipment Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
Scaler Wall Plate HDBaseT Transmitter NOTICE: Please read this user manual carefully before using this product. Pictures shown in this manual are for reference only, different model and specifications are subject to real product. This manual is for operation instruction only, not for any maintenance usage. The functions described in this version are updated till August 2014. Any changes of functions and parameters since then will be informed separately. Please refer to the dealers for the latest details.
Scaler Wall Plate HDBaseT Transmitter Contents 1. Introduction .................................................................................................................1 1.1 Introduction to TPHD405PT-WPI ....................................................................... 1 1.2 Features ............................................................................................................ 1 1.3 Package List ....................................................................................
Scaler Wall Plate HDBaseT Transmitter 1. Introduction 1.1 Introduction to TPHD405PT-WPI TPHD405PT-WPI is a Decora style transmitter that installs in a double-gang wall plate to provide a convenient interface for HDMI / VGA input sources. It has 1 HDMI IN, 1 VGA IN and 1 HDBT OUT with PoC. It supports VGA with full HD scaler, and HDMI 1.4 with 4k& 3D, input signals support auto-switching.
Scaler Wall Plate HDBaseT Transmitter Notes：Please confirm if the product and the accessories are all included, if not, please contact with the dealers. 2. Panel Description 2.1 Front Panel No.
Scaler Wall Plate HDBaseT Transmitter ⑥ AUDIO IN ⑦ HDMI IN ⑧ LINK &HDCP ⑨ RESET source turn off when there is no VGA input signal Connect with the audio output socket of VGA source device, deliver synchronous audio source with VGA signal source when choosing VGA as source signal. Connect with HDMI source device. The indicator will illuminate yellow when there is VGA signal input and illuminate green when the signal source is chosen as input source.
Scaler Wall Plate HDBaseT Transmitter No. Name Description Power in port, 2-pin pluggable terminal block, connect with DC ① Power In 12V power adapter Power out port, connect with WP8 to energize it with a 12V ② Power Out power output Serial port, connects with a far-end receiver, supports bi-directional RS232 control (send control signal from local or ③ RS232 receive control signal sent from far-end devices).
Scaler Wall Plate HDBaseT Transmitter TP TP 4 HD P 05 4 HD 02 PR PI T- W Projector PC IR Remote Blue -ray PC Rs232 3.3 Connection Procedure Step1. Connect HDMI source device (e.g. Blue-ray DVD) to HDMI input ports of TPHD405PT-WPI with HDMI cable. Connect a VGA source device (e.g. PC) to the VGA input port of TPHD405PT-WPI with VGA cable. Step2. Connect a TPHD402PR to the HDBT port on the rear panel with twisted pair. Step3. Connect a HDMI display to the HDMI OUT port of TPHD402PR. Step4.
Scaler Wall Plate HDBaseT Transmitter Note: TPHD405PT-WPI supports unidirectional PoC, i.e, TPHD405PT-WPI can get power from far-end PoC devices with PoC function while it can’t energize far-end PoC devices when the power supply is connected to TPHD405PT-WPI. 3.4 Energizing WP8 TPHD405PT-WPI has a 12V power output port on the rear panel. Connect the 12V power output port of TPHD405PT-WPI to the power port of WP8 (refer to the following figure), TPHD405PT-WPI is capable of energizing WP8.
Scaler Wall Plate HDBaseT Transmitter monitoring, conference room, big screen displaying, television education, command & control center and smart home etc. 4. Control Modes 4.1 IR control TPHD405PT-WPI provides an IR IN/ IR OUT socket for connection to IR receiver/ IR Transmitter to attain bi-directional IR transmission with the far-end receiver. Control far-end device from local Control TPHD405PT-WPI or far-end display device from local by the IR remote of far-end display.
Scaler Wall Plate HDBaseT Transmitter Parameter Configuration area Monitoring area, indicates if the command sent works. Command Sending area Please set the parameters of COM number, bound rate, data bit, stop bit and the parity bit correctly, and then you are able to send command in Command Sending Area. 4.2.
Scaler Wall Plate HDBaseT Transmitter 50619% 50626% 50627% 50628% 50629% 50620% 50621% Change the resolution to 1360X768 HD Change the resolution to 1024X768 XGA Change the resolution to 1280X720 720P Change the resolution to 1280X800 WXGA Change the resolution to 1920X1080 1080P Change the resolution to1920X1200 WUXGA Change the resolution to1600X1200 UXGA Resolution: 1360x768 Resolution: 1024x768 Resolution: 1280x720 Resolution: 1280x800 Resolution: 1920x1080 Resolution: 1920x1200 Resolution
Scaler Wall Plate HDBaseT Transmitter dynamic, standard, mild, or user.) 50699% 50779% 50780% 50790% 50791% 50792% Check the system version Version Vx.x.
Scaler Wall Plate HDBaseT Transmitter 50670% Move the image to left Output Position Adjust X xx 50671% Move the image to right Output Position Adjust X xx 50672% Move the image up Output Position Adjust Y xx 50673% Move the image down Output Position Adjust Y xx 50674% 50675% 50676% 50677% Stretch left from left side (increase image width) Pull right from left side (decrease image width) Stretch upwards from bottom side (decrease image height) Stretch downwards from bottom side (increase ima
Scaler Wall Plate HDBaseT Transmitter 5. Specification Audio Input Input Signal 1 HDMI, 1 VGA, 1 AUDIO, 1 IR, 1 RS232 Connector 1 19-pin Type A HDMI female; 1 15-pin VGA; 1 3.5mm stereo jack; 1 3.5mm IR socket;1 3-pin pluggable terminal block Output Output Signal 1 HDBaseT, 1 IR Connector 1 RJ45; 1 3.
Scaler Wall Plate HDBaseT Transmitter 6. Panel Drawing 88.72 mm VGA IN IN 12V IR OUT AUDIO IN OUT Tx 12V Rx HDMI RS232 Tx 104.22 mm RESET IR IN 68.90 mm VGA LINK HDCP PoC IN HDBT OUT POWER Rx RS232 FIRMWARE HDMI IN 46.00 mm PTN Electronics Limited 13 www.PTN-electronics.
Dual Input Wall Plate HDBaseT Transmitter 7. Troubleshooting & Maintenance Problems Causes Solutions The connecting cables may not be connected correctly or it may be broken Check whether the cables are connected correctly and in working condition. POWER indicator doesn’t work or no respond to any operation Loose or failed power cord connection Ensure the power cord connection is good Cannot control the device by control device (e.g.
Scaler Wall Plate HDBaseT Transmitter 8. After-sales Service If there appear some problems when running TPHD405PT-WPI, please check and deal with the problems reference to this user manual. Any transport costs are borne by the users during the warranty. 1) Product Limited Warranty: PTN warrants that its products will be free from defects in materials and workmanship for three years, which starts from the first day you buy this product (The purchase invoice shall prevail).
www.PTN-electronics.com PTN Electronics Limited Tel: +86-755-2846 1819 Fax: +86-755-8471 7796 Email: info@PTN-electronics.com Website: www.PTN-electronics.
