User manual

Scaler Wall Plate HDBaseT Transmitter

PTN Electronics Limited 5 www.PTN-electronics.com

3.3 Connection Procedure

Step1. Connect HDMI source device (e.g. Blue-ray DVD) to HDMI input ports of

TPHD405PT-WPI with HDMI cable. Connect a VGA source device (e.g. PC) to

the VGA input port of TPHD405PT-WPI with VGA cable.

Step2. Connect a TPHD402PR to the HDBT port on the rear panel with twisted pair.

Step3. Connect a HDMI display to the HDMI OUT port of TPHD402PR.

Step4. Connect a control terminal to the RS232 port on the front panel of TPHD402PR.

Step5. Both TPHD405PT-WPI and TPHD402PR have IR IN and OUT. When one model

is used for IR signal receiver, the IR signal must be sent out by the other model.

For example: When “IR IN” of TPHD405PT-WPI connects with an IR receiver,

the IR transmitter must connect to IR OUT of TPHD402PR.

The IR signal can be transmitted bi-directionally between TPHD405PT-WPI

and TPHD402PR.

Step6. Connect control device (e.g. PC) to RS232 port of TPHD405PT-WPI or

TPHD402PR (bi-directional RS232 control, either is available).

Step7. Connect DC 24V power adaptor to the power port of TPHD402PR,

TPHD405PT-WPI is able to get power from TPHD402PR with PoC solution.

IR Remote

ue-

Projector

Rs232