User's Manual

Page 46 of 58
Rev 1.4 7/19
Flip & Mirror
Check the “Flip” box to invert the image vertically for a ceiling mount. Check the “Mirror” box to invert the
image horizontally. The default setting is unchecked.
Apply, Cancel and Default Buttons
After adjusting the parameters, press the "Apply" button to save settings. Press the "Cancel" button to cancel
the adjustment of the parameters. Press the "Default" button to return to the default value.
2.2 Audio Setup
Click “Audio”. The audio parameters may now be set in the right side area.
Audio Type: AAC is the only audio format currently supported.
Sample rate: Selectable as either 44.1 K and 48 K.
Bit rate: Selectable among 96k, 128k or 256k
Input Type: Currently Line in only
Input VolL: Sets the volume of the left audio channel (from -97 to +30dB)
Input VolR: Sets the volume of the right audio channel (from -97 to +30dB)
ADTS: Audio Data Transport Stream: Set to ‘On’ or ‘Off (use for MPEG 2 only – may not be applicable on
all models)