User Manual

Page 42 of 56
Rev 1.6 7/19
1.3 PTZ Control
1) Pan and Tilt control: Up, Down, Left and Right arrows and the home
button allow you to manual drive the camera to the desired position.
2) Zoom: Zoom in and Zoom out buttons allow for wide or narrow (tele)
views of the space.
3) Focus: Focus In and Focus Out buttons allow for fine manual focus
adjustment if the camera has any problems autofocusing on a difficult
object.
4) PTZ Speeds: Pan speed can be set at any rate between 1 - 24, Tilt
speed can be set at any rate between 1 - 20.
Zoom and Focus speeds can be set at any rate between 0 – 7.
5) PTZ Presets: After manually setting up a shot that you would like to
return to later, you can save presets for quick recall of these positions. Type
a number between 0 and 254 into the Preset box. Click the "Set" button to
save the current location with that preset number. Click the “Call” button to
cause the camera to return to that position. This enables smooth, quick and
convenient control without the need to manually drive the camera.
6) PTZ/OSD dropdown: From the dropdown menu, clicking the OSD
option will open the on screen display menu of the camera giving you
control from within the IP interface