User Manual

Page 45 of 56
Rev 1.6 7/19
1.2 Image Setup
Click “Image”. The image parameters may now be set in the right side area.
Brightness
Image brightness 0-14. Use the slider control. The box on the right shows the corresponding numerical value.
The Default setting is 7.
Saturation
Color Saturation 0-14. Use the slider control. The box on the right shows the corresponding numerical value.
The Default setting is 5.
Contrast
Contrast 0-14. Use the slider control. The box on the right shows the corresponding numerical value. The
Default setting is 8.
Sharpness
Sharpness 0-15. Use the slider control. The box on the right shows the corresponding numerical value. The
Default setting is 5.
Hue
Hue 0-14. Use the slider control. The box on the right shows the corresponding numerical value. The Default
setting is 6.