User Manual

Page 47 of 56
Rev 1.6 7/19
1.4 System Settings
Click “System”. The system parameters may now be set in the right side area.
1) Initialize
Work Mode: RTSP (Real Time Streaming Protocol) is the only streaming protocol currently supported.
Reboot: Click the "Reboot" button to initiate a system restart. This is required after changing some settings.
2) User
User and Password: The user can modify the password (letters and Numbers only).
The default settings are UserName: admin and Password: admin
Apply and Cancel Buttons
After modifying the parameters, press the "Apply" button to save. Press the "Cancel" button to leave settings
unchanged.