User's Manual

Page 47 of 58
Rev 1.4 7/19
Apply and Cancel Buttons
After modifying the parameters, press the "Apply" button to save. Press the "Cancel" button to leave settings
unchanged.
2.3 System Settings
Click “System”. The system parameters may now be set in the right side area.
1) Initialize
Work Mode: RTSP (Real Time Streaming Protocol) is the only streaming protocol currently supported.
Reboot: Click the "Reboot" button to initiate a system restart. This is required after changing some settings.
2) User
User and Password: The user can modify the password (letters and Numbers only).
The default settings are UserName: admin and Password: admin
Apply and Cancel Buttons
After modifying the parameters, press the "Apply" button to save. Press the "Cancel" button to leave settings
unchanged.
2.4 Network Settings
Click “Network”. The network parameters may now be set in the right side area.