User's Manual

With the “Speed settings” function, you can set the disinfection speed, supporting
the speed settings of 0.5m/s, 0.6m/s, 0.7m/s, 0.8m/s and 0.9m/s.
Service functions
In the “Map settings” function, you can select from multiple maps. In the robot one-to-one
parking mode, select the current map to configure the parking position for the robot.
Map settings
port_3
91 %
Basic setup
WLAN
Map settings
Volume settings
Speed settings
Version update
Debug
Select map
Map_2
Map_3
Map_4
Map_1
Select port
port_1
port_2
Settings
Advanced settings
Advanced settings
The “Voice settings” function provides voice packet replacement and custom settings of
cruise voice.
Voice settings
Volume settings
91 %
Voice settings
Playback interval
Select voice package
Default voice package
Voice package_1
Voice package_2
Voice package_3
Voice package_4
Delete
Update
Update
Download
Download
5s 10s 15s 20s 25s
Basic setup
WLAN
Version update
Debug
Settings
1. Check the available voice packets for
update support and choose to download
the voice packets.
2. After downloading, select the
corresponding voice packet for replace-
ment.
3. Select “Default” to restore the default
voice packet
4. Press and hold the voice packet to delete
it.
Advanced settings
Advanced settings
91 %
Speed settings
Speed（m/s）
0.5 0.6 0.7 0.8 0.9
Settings
Volume settings
Basic setup
WLAN
Version update
Debug
Speed settings
With the “Version upgrade” function, you can check the current version and whether it is
up-to-date. If it is not up-to-date, you can choose to check for updates, download and
update the latest version.
Version upgrade
91 %
Software update
Check update
Current program version
The current version is the latest
1.2.3
Speed settings
Settings
Volume settings
Basic setup
WLAN
Version update
Debug
Select advanced settings to set the speed of the disinfection mode, supporting 1.0m/s,
1.1m/s and 1.2m/s.
Advanced settings
91 %
Advanced settings
Speed（m/s）
0.5 0.7 0.8 0.9 1.0 1.1 1.20.6
Speed settings
Volume settings
Basic setup
WLAN
Version update
Debug
Settings
Note: The commissioning setting is advanced robot operation, which requires consulting technical support personnel
before proceeding with the operation, the Company does not assume any responsibility for all accidents caused by
unauthorized operation.
User manual
21 22