Instructions / Assembly

ASSEMBLY & USE INSTRUCTIONS
1. Check all plugs are connected well.
2. Check fuse in plug of light string is not burnt. If the fuse is burnt, please replace it with spare fuse enclosed.
( Refer to following fuse replacement instruction)
3. Check any bulb is loose in the socket or any broken bulb. ( Refer to following bulb replacement instruction.
BULB REPLACEMENT INSTRUCTIONS:
1. Unplug the product from the receptacle or other outlet device. Do not unplug by pulling the cord.
2. Allow bulb to cool. To remove bulb, lift tab and pull bulb out of socket. (see below diagram)
CAUTION – To reduce the risk of overheating, replace burned-out lamps promptly, use 3.5
volt lamps of 0.42 Watt size only.
3. Close the tab.
A. Find the faulty bulb. B. Open the tab and pull out the faulty bulb. C. Replace the faulty bulb with a new one. D. Close tab.
FUSE REPLACEMENT INSTRUCTIONS
Risk of fire. Do not replace attachment plug. It contains a safety device (fuse) that should not be removed.
Discard product if the attachment plug is
damaged.
1. Unplug product from the receptacles or
other outlet device. Do not unplug by pulling
on cord.
2. Open fuse cover. Slide open fuse access cover on top of attachment plug toward blades.
3. Remove fuse carefully.
4. Risk of fire. Replace fuse with 3Amp, 125 Volt fuse (provided with this product) for each light string plug.
5. Close fuse cover: slide closed the fuse access cover on top of attachment plug.
SPARE PARTS:
Spare Fuse Spare Bulb
CONTACTING CUSTOMER SERVICE:
If you have any queries about the product, you can call the free number for solution.
FOR CUSTOMER SERVICE CALL: 1-800-311-3324
Business Hours: Monday - Friday - 9:30 am - 4:00 pm EST.