TREE ASSEMBLY INSTRUCTIONS The Oldest Family Name for Christmas Trees in America® SAVE THESE INSTRUCTIONS! -1-
Table of Contents 1. Important Safety Notes Page 3 2. Attention Page 4 3. Getting Started Page 4 Opening the box Page 4 Setting up the stand Page 5 Setting up the tree Page 5 4.
It Took Over 60 Years To Grow This Puleo Christmas Tree, As the “Oldest Family Name for Christmas Tree In America ®”, our mark of quality is on every Puleo Christmas Tree. With proper handling and storage, you will be able to make your tree a lasting part of your holiday tradition. CAUTION: IMPORTANT SAFETY INSTRUCTIONS 1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS Do not connect extra light sets, tree tops or any other electrical items to the existing light sets on your pre-lit tree.
This product employs an overload protection (fuse) in the plug of each light set. A blown fuse indicates an overload or short circuit situation. If the fuse blows, unplug the product from the power supply. Replace the fuse as per the replacement instructions indicated in this manual (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short circuit may be present and the product should be discarded.
3 Eyebolt screws (trees with plastic stands or pot bases do not have eyebolt screws) Packet of replacement bulbs and fuses. 2 or more tree sections depending on the size of the tree Now that you have opened the box, you will notice that each section of the tree is wrapped in bubble wrap for protection during shipping. Depending on the size of your tree, you may have as few as 2 sections or as many as 9 sections. Either way, Section A is always the top section of the tree.
4. Tree Lighting Instructions Getting your tree lit is as easy as 1-2-3. You may also follow the tags attached to each section of the tree. Connecting the Wiring Harnesses Now that the bottom section of the tree is shaped, plugged in and lit, you will now need to plug in and shape the next section above it. For your easy handling, the plugs and cord connectors are marked with round labels marked as ①②③④ (See Figures 2 & 3). Make sure that the labels on the plugs and cord connectors match each other.
Diagram of Tree with 3 sections and 550 lights or less (Figure 6) -7-
Diagram of Tree with 3 sections and more than 550 lights (Figure 7) -8-
Diagram of Tree with 4 sections and 800 or less lights (Figure 8) -9-
Diagram of Tree with 4 sections and more than 800 lights (Figure 9) - 10 -
Diagram of Tree with Low Voltage Lights and UL listed adaptor (Figure 10) - 11 -
5. Shaping the Tree Branches You can shape the tree branches working with each row individually, and working your way from the inner tips outward on each branch. Shape the tips to fill gaps between branches to make the tree full and natural looking. (Figure 11) 6. Helpful Hints The following helpful instructions should assist you with common questions that many people have.
How to repair an Incandescent light set? Most individual light set failures are caused by a bulb not seated properly in its socket or by a shunt failure. Shunt Failure A shunt failure is a fail-safe feature below the filament of each bulb. The shunt is activated when the filament burns out. This is what keeps the rest of the light set illuminated. Occasionally, the shunt will fail causing the circuit to be broken and the entire set to go out.
How to replace a light set? Locate the plug of the non-working set connected to the wiring harness. Un-wrap the old set starting at the plug. Plug the new light set into the wiring harness. Make sure to plug the new set in the same location as the set that has been removed. Wrap the replacement set on the branch as before. Helpful Hint: Green electrical tape is used to cover the plugs for safety purposes. Replacing a light set or fuses is the only time that the electrical tape should be removed.
Warranty Puleo International, Inc warrants this product against defects in material or workmanship outlined as follows: 5 Year Limited Warranty on Artificial Christmas Tree 1.) For a period of 5 years from date of purchase, Puleo International, Inc will replace defective parts on the product at no charge. Please note that the customer is responsible for shipping and handling. 2.) This limited warranty does not cover damage resulting from accident, misuse, abuse, negligence or normal wear and tear. 3.
7. Accessories available for your Puleo Christmas Tree Several accessories can be purchased for your tree. a) Tree Storage Bags: For storing your tree in a secure and convenient way during the off-season. b) On/Off Foot Switch: A convenient way to turn your tree On & Off. c) Rotating Tree Stand: Can securely hold a tree that weighs up to 100 lbs. 8. Contact Us We back up our trees with a highly professional customer service team. Email: info@puleointl.
