Owner's manual

A. Remove the “SPACER” fron the carton and check for any shipping damage.

B. Unclamp the vacuum cleaner head. Lift it off and place it on a clean surface.

C. Remove the HEPA ﬁ lter from the vacuum cleaner can and place it on a clean surface.

D. Remove the hose from inside the vacuum cleaner can.

Assembly Instructions

Save for future reference

45-10P Wet/Dry HEPA

PAGE 1
Assembly Instructions Save for future reference 45-10P Wet/Dry HEPA A. Remove the “SPACER” fron the carton and check for any shipping damage. B. Unclamp the vacuum cleaner head. Lift it off and place it on a clean surface. C. Remove the HEPA filter from the vacuum cleaner can and place it on a clean surface. D. Remove the hose from inside the vacuum cleaner can.
PAGE 2
Assembly Instructions Save for future reference 45-10P Wet/Dry Spacer HEPA CAUTION Attach screws to float cage! E. Take the “SPACER” and set it on top of the vacuum cleaner can. Clamp it to the can. F. Place the HEPA filter in the top of the “SPACER”. G. Put the vacuum cleaner head on top of the “SPACER” and clamp.