Instruction manual

Page 7
Connectors
TM-1405GE Software
Figure 7. HR10A-10R-12P
2.2 Ethernet
The GigE socket, marked on the camera’s back panel as “GigE,” is a standard RJ-45 Ethernet socket.
Use at least cat5e UTP cables (Cat6 cables are preferred). If you wish to connect the camera directly to
a PC, you must use a cross-over cable. Refer to the Cam2Net User's Manual for details.
1
Figure 8. Ethernet GigE Socket
1. JAI PULNiX recommends the use of shielded cables to reduce emissions and for CE/FCC
compliance. Double-shielded cables will further reduce emissions.
1
9
2
10
8
3
11
12 7
4
5
6
GigE