Instruction manual

Page 13
Configuring the TM-1405GE Camera
TM-1405GE Software
Mode
Use the pull-down menu shown in Figure 14. to select from Manual or Async mode.
Figure 14. Mode Control Pull-down
Shutter Speed
The shutter speed setting, shown in Figure 15, allows you to select the specific shutter speed for Manual
shutter and Async shutter. Manual shutter speed 0 is No Shutter mode; Async shutter speed 0 is Async -
No Shutter mode; Async shutter speed 9 is Async - No Delay shutter mode (pulse width control). Direct
Shutter allows you to select shutter speed for direct shutter count by the video line. External trigger
polarity is set to active low in the Async mode.
Figure 15. Shutter Speed
3.4.3 Scan Mode
The TM-1405GE camera has full and partial scan modes as shown in Figure 16. The partial scan area
allows you to select the different scan lines. When the scan area starts from an odd line, for a color
camera, an offset of 1 is added in the vertical direction.
Figure 16. Scan Mode