User's Manual

RU700A 1.0

1. About RU700A

The RU700A 1.0 is a research and development device intended for OEM integrators in specific

industrial use as described in this document. It is not intended for general public consumer use-cases. It

is strongly advised to consult the relevant references and to develop an understanding of the applicable

underlying technology, tools, and methods before using this product.

The RU700A 1.0 provides NB-IoT connectivity over the Upper 700 MHz A-Block frequency band, and is

intended primarily as a tool for validation of network coverage and certain industrial use-cases. As such,

it can only be operated on a network which supports such technology and the channelization scheme

specific to the Upper 700 MHz A-Block. Contact Puloli to get current information on coverage locations.

2. References

[1] Pycom GPy specification: https://pycom.io/product/gpy

[2] Pycom Expansion Board V3: https://docs.pycom.io/datasheets/boards/expansion3

[3] Pycom Pycase enclosure: https://pycom.io/product/pycase-grey

3. Product Support and Contact Info

For all questions regarding the product and network coverage, please contact support at

support@puloli.com.