User's Manual

RU700A 1.0
© 2019 Puloli, Inc. v1.1 7
The device will power up, initialize, perform a network search, and register itself on the network if
coverage is available. The device status is indicated by an LED, as described below.
Table 2. LED status indicator
LED Color
Description
Orange (steady)
Initializing
Green (rapid blink)
Initialization successful
Yellow (slow blink)
Searching for network
Magenta (slow blink)
Registered on network, idle
Magenta (rapid blink)
Transmitting data to network
Red (solid)
Error condition; automatic reboot after 20 seconds
Blue (slow blink)
Device in diagnostic mode; manual restart required
Upon connecting to an authorized network, the device will periodically send internally-generated
diagnostic and status messages to the network, as well as any use-case-dependent IoT data.
The device can be re-started either by cycling the power or by pressing the reset button next to the LED,
accessible through a small hole in the outer case, as shown below.
Figure 4. Access to reset button
6. Regulatory Information
RU700A 1.0.
This product contains FCC ID 2ASLSRU700A10.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.