Datasheet
Table Of Contents
- 1. Intended Use
- 2. Installation Requirements
- 3. Input Voltage
- 4. Soft-start and Input Inrush Current Surge
- 5. Output
- 6. Hold-up Time
- 7. Efficiency and Power Losses
- 8. Functional Diagram
- 9. Front Side and User Elements
- 10. Terminals and Wiring
- 11. Reliability
- 12. EMC
- 13. Environment
- 14. Protection Features
- 15. Safety Features
- 16. Dielectric Strength
- 17. Approvals
- 18. RoHS, REACH and Other Fulfilled Standards
- 19. Physical Dimensions and Weight
- 20. Accessories
- 21. Application Notes
- 21.1. Peak Current Capability
- 21.2. Back-feeding Loads
- 21.3. Inductive and Capacitive Loads
- 21.4. Charging of Batteries
- 21.5. External Input Protection
- 21.6. Requirements for the Supplying Source
- Parallel Use to Increase Output Power
- 21.8. Parallel Use for Redundancy
- 21.9. Daisy Chaining of Outputs
- Series Operation
- 21.11. Use in a Tightly Sealed Enclosure
- 21.12. Mounting Orientations
CD5.121
CD-Series
DC/DC Converter 12V, 8A
19. PHYSICAL DIMENSIONS AND WEIGHT
Weight 425g / 0.94lb
DIN-Rail Use 35mm DIN-rails according to EN 60715 or EN 50022 with a height of 7.5 or 15mm.
The DIN-rail height must be added to the unit depth (102mm) to calculate the total required
installation depth.
Installation Clearances See chapter 2
Fig. 19-1 Front view Fig. 19-2 Side view
Mar. 2016 / Rev. 1.5 DS-CD5.121-EN
All parameters are specified at 12V, 8A, 24Vdc input voltage, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
16/22