Datasheet

CP10.121, CP10.122
CP-Series
12V, 16A, 192W, SINGLE PHASE INPUT
15. FRONT SIDE AND USER ELEMENTS
Fig. 15-1
Front side CP10.121
Fig. 15-2
Front side CP10.122
A Input Terminals (screw terminal)
N, L Line input
PE (Protective Earth) input
B
Output Terminals (screw terminal, two identical + poles and
three identical - poles)
+ Positive output
– Negative (return) output
C
Output voltage potentiometer
Open the flap to adjust the output voltage. Factory set: 12.0V
D
DC-OK LED (green)
On, when the output voltage is >90% of the adjusted output
voltage
E
DC-OK Relay Contact (quick-connect spring-clamp terminals)
Monitors the output voltage of the running power supply.
See chapter 8 for details.
F Remote ON/OFF Input (quick-connect spring-clamp terminals)
Pin 15 and 16 must be connected to turn the power supply off.
See chapter 9 for details.
Aug. 2017 / Rev. 1.3 DS-CP10.121-EN
All parameters are typical values specified at 230Vac, 50Hz input voltage, 12V 16A output, 25°C ambient temperature and
after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
14/28