Datasheet

CP10.121, CP10.122
CP-Series
12V, 16A, 192W, SINGLE PHASE INPUT
21. APPROVALS
EC Declaration of Conformity The CE mark indicates conformance with the
- EMC directive,
- Low-voltage directive (LVD) and the
- ATEX directive (only CP10.121)
CB Scheme,
Information Technology Equipment
IEC 60950-1
2
nd
Edition
UL 508
(only CP10.121)
IND. CONT. E
Q.
Listed for use as Industrial Control Equipment;
U.S.A. (UL 508) and Canada (C22.2 No. 107-1-01);
E-File: E198865
UL 60950-1
2
nd
Edition
(only CP10.121)
Recognized for use as Information Technology Equipment,
Level 5; U.S.A. (UL 60950-1) and Canada (C22.2 No. 60950-1);
E-File: E137006
Applicable for altitudes up to 2000m.
ANSI / ISA 12.12.01-2015
Class I Div 2
(only CP10.121)
Recognized for use in Hazardous Location Class I Div 2 T4
Groups A,B,C,D systems; U.S.A. (ANSI / ISA 12.12.01-2015) and
Canada (C22.2 No. 213-M1987)
Approval for use in hazardous locations Zone 2 Category 3G.
Number of ATEX certificate: EPS 15 ATEX 1 101 X
The power supply must be built-in in an IP54 enclosure.
EN 60079-0, EN 60079-15
ATEX
(only CP10.121)
II 3G Ex nA nC IIC T4 Gc
Suitable for use in Class 1 Zone 2 Groups IIa, IIb and IIc
locations. Number of IECEx certificate: IECEx EPS 15.0079X
IEC 60079-0, IEC 60079-15
(only CP10.121)
IECEx
Marine
(only CP10.121)
GL (Germanischer Lloyd) classified
Environmental category: C, EMC2
Marine and offshore applications
Registration for the Eurasian Customs Union market
(Russia, Kazakhstan, Belarus)
EAC TR Registration
(only CP10.121)
22. OTHER FULFILLED STANDARDS
RoHS Directive Directive 2011/65/EU of the European Parliament and the
Council of June 8
th
, 2011 on the restriction of the use of
certain hazardous substances in electrical and electronic
equipment.
REACH Directive
Directive 1907/2006/EU of the European Parliament and the
Council of June 1
st
, 2007 regarding the Registration,
Evaluation, Authorisation and Restriction of Chemicals
(REACH)
IEC/EN 61558-2-16
(Annex BB)
Safety Isolating
Transformer
Safety Isolating Transformers corresponding to Part 2-6 of the
IEC/EN 61558
Aug. 2017 / Rev. 1.3 DS-CP10.121-EN
All parameters are typical values specified at 230Vac, 50Hz input voltage, 12V 16A output, 25°C ambient temperature and
after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
19/28