Datasheet
CP10.121
CP-Series
12V, 16A, SINGLE PHASE INPUT
3. AC-INPUT
AC input nom. AC 100-240V suitable for TN-, TT- and IT mains networks
AC input range min. 85-264Vac continuous operation
min. 264-300Vac < 500ms
Allowed voltage L or N to earth max. 300Vac continuous, IEC 62103
Input frequency nom. 50–60Hz ±6%
Turn-on voltage typ. 80Vac steady-state value, see Fig. 3-1
typ. 55Vac dynamic value (250ms)
Shut-down voltage typ. 74Vac steady-state value, see Fig. 3-1
External input protection See recommendations in chapter 24.3.
AC 100V AC 120V AC 230V
Input current typ. 2.11A 1.74A 0.92A at 12V, 16A, see Fig. 3-3
Power factor
*)
typ. 0.99 0.99 0.96 at 12V, 16A, see Fig. 3-4
Crest factor
**)
typ. 1.5 1.5 1.65 at 12V, 16A
Start-up delay typ. 450ms 440ms 390ms see Fig. 3-2
Rise time typ. 18ms 18ms 18ms at 12V, 16A const. current load,
0mF load capacitance, see Fig. 3-2
typ. 35ms 35ms 35ms at 12V, 16A const. current load,
16mF load capacitance,, see Fig. 3-2
Turn-on overshoot max. 200mV 200mV 200mV see Fig. 3-2
External input protection See recommendations in chapter 24.3.
*) The power factor is the ratio of the true (or real) power to the apparent power in an AC circuit.
**) The crest factor is the mathematical ratio of the peak value to RMS value of the input current waveform.
Fig. 3-1 Input voltage range Fig. 3-2 Turn-on behavior, definitions
Turn-on
85V
Rated
input range
max.
500ms
V
IN
P
OUT
4/26
300Vac264V
Shut-down
Start-up
delay
Rise
Time
Overshoot
- 5%
Output
Voltage
Input
Voltage
Fig. 3-3 Input current vs. output current at
12V output voltage
Fig. 3-4 Power factor vs. output current at
12V output voltage
20A
0246810121416
0
0.5
1.0
1.5
2.0
2.5
3A
Input Current, typ.
18
Output Current
a) 100Vac
b) 120Vac
c) 230Vac
(a)
(b)
(c)
Power Factor, typ.
2 4 6 8 10 12 20
A
0.75
0.8
0.85
0.9
0.95
1.0
Output Current
1614 18
(a)
(b)
(c)
(a) 100Vac,
(b) 120Vac,
(c) 230Vac
Jun. 2015 / Rev. 1.0 DS-CP10.121-EN
All parameters are specified at 12V, 16A, 230Vac, 50Hz, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany