Datasheet

CP10.361
CP-Series
36V, 6.7A, 240W, SINGLE PHASE INPUT
14. FRONT SIDE AND USER ELEMENTS
Fig. 14-1
Front side
A Input Terminals
Screw terminals
N, L Line input
PE (Protective Earth) input
B
Output Terminals
(two identical + poles and three identical - poles)
Screw terminals
+ Positive output
– Negative (return) output
C Output voltage potentiometer
Open the flap to adjust the output voltage. Factory set: 36.0V
D
DC-OK LED (green)
On, when the output voltage is >90% of the adjusted output voltage
E DC-OK Relay Contact
(spring-clamp terminals)
Monitors the output voltage of the running power supply. See chapter 8 for
details.
Aug. 2017 / Rev. 1.1 DS-CP10.361-EN
All parameters are specified at 36V, 6.7A, 230Vac, 50Hz, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
14/29