Data Sheet

CPS20.241-60
C-Series
24V, 400W, DC/DC CONVERTER
Daisy chaining:
Daisy chaining (jumping from one DC/DC converter output to the next) is allowed as long as the average output
current through one terminal pin does not exceed 25A. If the current is higher, use a separate distribution terminal
block as shown in Fig. 12-2.
Fig. 12-1 Daisy chaining of outputs Fig. 12-2 Using distribution terminals
Load
+
-
DC/DC
Converter
+ +
- -
Output
DC/DC
Converter
+ +
- -
Output
max 25A!
continuous
Distribution
Terminals
Load
+
-
DC/DC
Converter
+ +
- -
Output
DC/DC
Converter
+ +
- -
Output
13. FRONT SIDE AND USER ELEMENTS
Fig. 13-1 Front side
A
Input Terminals (quick-connect spring-clamp terminals)
+ Positive input
– Negative (return) input
PE (Protective Earth) input
B
Output Terminals (quick-connect spring-clamp terminals)
+ Positive output
– Negative (return) output
C
DC-OK Relay Contact (push-in spring-clamp terminals)
The DC-OK relay contact is synchronized with the DC-OK LED.
See chapter 8 for details.
D
DC-OK LED (green)
On, when the output voltage is >22V.
Aug. 2016 / Rev. 1.0 DS-CPS20.241-60-EN
All parameters are specified at 24.5V, 16.3A, 110Vdc, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
10/22