Data Sheet

UZK12.071, UZO12.07
U-Series
BATTERY MODULE 12V, 7AH
17. WALL/ PANEL MOUNTING
Panel/ wall mounting is possible by detaching the DIN-Rail brackets
Fig. 17-1 Panel/ wall mounting – Removing the aluminium brackets and plastic slide
Detach the two aluminum brackets
by removing the two screws with a
Torx screwdriver (Torx 10).
Remove the plastic lock mechanism
by using a flat-blade screwdriver to
move the lock downwards while
pushing the plastic slide upwards at
the same time. Detach the plastic
slide.
Panel/ wall mounting is possible
by using either the four holes on
the rear or on the bottom of the
unit.
Fig. 17-2 Hole pattern for wall mount Fig. 17-3 Hole pattern for bottom mount
All dimensions in mm
All dimensions in mm
Aug. 2017 / Rev. 2.2 DS-UZK12.071
All parameters are typical values specified at, 25°C ambient temperature unless otherwise noted.
www.pulspower.com Phone [phone] Germany
9/11