Data Sheet
ZM1.WALL
WALL Mounting Bracket
Jan. 2015 / Rev. 2.0 DS-ZM1.WALL-EN / All parameters are specified at 25°C ambient unless otherwise noted.
The information presented in this document is believed to be accurate and reliable and may change without notice.
www.pulspower.com Phone +49 89 9278 0 Germany
1. GENERAL DESCRIPTION
BRACKET FOR WALL MOUNTING
This bracket is used to mount the unit onto a flat
surface without utilizing a DIN-Rail.
The bracket is suitable for all DIMENSION units, which
have the bracket listed as an accessory in the device
datasheets.
2. DIMENSIONS AND INSTALLATION DATA
N L PE
+
+
- -
C
B
A
133
143
5.1
INPUT
OUTPUT
A B C
CD5 32mm 4.8mm 22.5mm
CS3 32mm 4.8mm 22.5mm
CS5 32mm 4.8mm 22.5mm
CS10 60mm 5.8mm 48.5mm
CT5 40mm 5.0mm 30.0mm
CT10 62mm 5.7mm 50.6mm
QS3 32mm 4.8mm 22.5mm
QS5 40mm 5.3mm 29.5mm
QS10 60mm 5.8mm 48.5mm
QT20 65mm 6.3mm 40.0mm
QTD20 65mm 6.3mm 40.0mm
QS20 82mm 8.0mm 66.0mm
QS20.244 70mm 8.0mm 54.0mm
UF20 64mm 12.0mm 40.0mm
UB10 49mm 5.3mm 38.4mm
YR2 32mm 4.8mm 22.5mm
YRM2 2mm 4.8mm 22.5mm
Fig. 2-1 Physical dimensions
1/2