User manual

Wall Mounting Bracket

Wand Montage Adapter

This bracket is used to mount the unit onto a

flat surface without utilizing a DIN-Rail.

Diese Halterung kann zur Montage von

Geräten auf ebenen Oberflächen ohne DIN-

Schiene verwendet werden.

Order Number / Artikel Nummer:

ZM1.WALL

Quantity / Menge:

1 Set

DE Wand Montage Adapter

EN Wall Mounting Bracket

Kit de montage mural

ES Soporte para montaje en pared

IT Staffa per montaggio a parete

PT Suporte de montagem

PU-200.010.75-10C

mm A B C

CD5 32mm 4.8mm 22.5mm

CS3 32mm 4.8mm 22.5mm

CS5 32mm 4.8mm 22.5mm

CS10 60mm 5.8mm 48.5mm

CT5 40mm 5.0mm 30.0mm

CT10 62mm 5.7mm 50.6mm

QS3 32mm 4.8mm 22.5mm

QS5 40mm

5.3mm 29.5mm

QS10 60mm

5.8mm 48.5mm

QT20 65mm 6.3mm 40.0mm

QTD20 65mm 6.3mm 40.0mm

QS20 82mm 8.0mm 66.0mm

QS20.244 70mm 8.0mm 54.0mm

UF20 64mm 12.0mm 40.0mm

UB10 49mm 5.3mm 38.4mm

YR2 32mm 4.8mm 22.5mm

N L PE

- -

133

143

5.1

INPUT

OUTPUT

YRM2 32mm 4.8mm 22.5mm

PAGE 1
Wall Mounting Bracket Wand Montage Adapter This bracket is used to mount the unit onto a flat surface without utilizing a DIN-Rail. A B C 5.1 + + - - 143 133 OUTPUT INPUT N L PE A B C mm CD5 CS3 CS5 CS10 CT5 CT10 QS3 QS5 QS10 QT20 QTD20 QS20 QS20.244 UF20 UB10 YR2 YRM2 Order Number / Artikel Nummer: ZM1.WALL DE EN FR ES IT PT Diese Halterung kann zur Montage von Geräten auf ebenen Oberflächen ohne DINSchiene verwendet werden.
PAGE 2
ZM1.WALL Wall Mounting Bracket / Wand Montage Adapter Mounting Instructions: Montageanleitung: 1) 1) 2) 3) Detach the two aluminium brackets by removing the four screws with a Torx 10 screwdriver (see picture 1). Remove the plastic lock mechanism by using a flatblade screwdriver to move the lock downwards while at the same time push the plastic slider upwards. Detach the plastic slider (see picture 2).