Replacement Part List

6
ASSEMBLY INSTRUCTIONS
Unpacking The Carton
After opening the carton, please remove all parts and check them against the following
list of components that are included:
To assemble the enclosed parts, please refer to the steps that follow:
1800PSI Pressure Washer
A. High Pressure Washer
D. Adjustable Nozzle
B. Gun
E. Two-way Connector
C. High Pressure Hose
F. Water Intake Filter (Pre-Install
ed
)
G. Detergent Bottle
H. Gun-Shelve
E
A
B
D
C
G
F
7
Step 1
Attach the high pressure hose to the gun. Use a wrench to tighten the fitting.
Step 2
1800 PSI Pressure Washer
Insert the adjustable spray nozzle into the gun. Push and turn the adjustable nozzle
clockwise onto the gun until it is hand tight and
t
o lock it in place. When the pieces
are joined
properly, you cannot separate the two components by pulling out on the
adjustable nozzle. All attachments must be inserted into the gun for proper use.