Operation Manual

ManualsBrandsPulsar ManualsAM5Y67

ENGLISH

CAL. 5Y67

RETROGRADE DAY INDICATOR

● Time indicates by the hour, minute and

second hands

● Date indicates by the date hand

● Day of the week indicates by the day

hand

● The 24-hour hand indicates the hour in

the 24-hour indication

Summary of content (6 pages)

PAGE 1
CAL.
PAGE 2
DISPLAY AND CROWN English Day hand (retrograde day indicator: see page 7) Minute hand Date hand a Hour hand b c CROWN Second hand 24-hour hand a. Normal position 2 b. First click c. Second click *Orientation of the retrograde display may vary depending on the model.
PAGE 3
SCREW DOWN CROWN [for models with screw down crown] 1 Turn Crown counterclockwise until you no longer feel the threads turning. 2 Crown can be pulled out. 1 Push Crown back in to normal position. English Locking the crown 2 Turn Crown clockwise while pressing it lightly until tight.
PAGE 4
DAY AND TIME SETTING Day hand CROWN 4 ➠ 1 Pull out to second click when Second hand is at the 12 o’clock position. 2 Turn clockwise to advance Hour and Minute hands until Day hand is set to the desired day of the week. 3 Turn to set the time. counterclockwise 4 Push the crown back into the normal position in accordance with a time signal.
PAGE 5
DATE SETTING CROWN 1 Pull out to first click. ➠ 2 Turn counterclockwise to set Date hand to the desired date. English 3 Push in.
PAGE 6
NOTES ON OPERATING THE WATCH English TIME/DATE SETTING ● To advance the day hand quickly, turn back the hour and minute hands 4 to 5 hours beyond the point the day changes (between 11:00 p.m. and 4:00 a.m.), and then advance them again until the day hand is set to the next. *The day hand will not move back by turning the crown counterclockwise. ● After the day hand reaches the last day of the week, turn the crown clockwise and the hand will return to the first day of the week (retrograde day indicator).