Operation Manual

English
7
NOTES ON OPERATING THE WATCH
TIME/DATE SETTING
● When setting the hour hand and 24-hour hand, check that AM/PM is correctly set.
The watch is so designed that the date and day change once in 24 hours.
● When setting minute hand, first advance it 4 to 5 minutes ahead of the desired time and
then turn it back to the exact minute.
● When setting the date, be careful not to pull out the crown to the second click instead
of the first click. Otherwise, the second hand stops and the time setting is made
necessary.
● To advance the day hand quickly, turn back the hour and minute hands about four hours
after the day changes to the next, and then advance them again until the day hand is set
to the next.