CAL. 7S26 AUTOMATIC DIVER ● Hour, minute and second hands ● Date ● Day 200 METER WATER RESISTANCE ● Suitable for scuba diving ROTATING BEZEL ● Elapsed time measurement during diving (up to 60 minutes) SCREW DOWN CROWN 7S26_E 1 05.3.
SCREW DOWN CROWN DISPLAY AND CROWN/BUTTONS [for models with screw down crown] Unlocking the crown Hour hand Minute hand 1 Turn Crown counterclockwise until you no longer feel the threads turning. MON 15 a b c Locking the crown 1 Push Crown back in to normal position. d Crown Second hand English English 2 Crown can be pulled out. Day and date 2 Turn Crown clockwise while pressing it lightly until tight.
HOW TO START THE WATCH TIME/CALENDAR SETTING This is an automatic mechanical watch. ● To initially start your watch: Swing it from side to side in a horizontal arc for about 30 seconds. CROWN 1 Unlock the crown by turning it counterclockwise. ➠ 1 4 7S26_E 2 Pull out the crown to the first click. 2 MON 15 3 4 3 Turn the crown clockwise until the previous day's date appears.
CROWN 5 Pull out the crown to the second click. 5 ➠ ➠ 8 6 7 6 Turn the crown to advance the hands until the date and day change to the next. When they have changed, the time is set for the A.M. period. Keep advancing the hands to set the correct time. ROTATING BEZEL The rotating bezel can show up to 60 minutes of elapsed time. 1 Turn the rotating bezel to align the “ ● ” mark to the minute hand. 2 7 Push back the crown. 8 Lock the crown by turning it clockwise while pressing it.
PRECAUTIONS Before diving, make sure that the watch operates normally and be sure to observe the precautions described below. Do not attempt to dive using the watch unless you have been properly trained in diving. Abide by the rules of diving for safety’s sake. ● Do not use the watch for saturation diving using helium gas. ● Check that: • the crown is locked tightly in place. • there are no visible cracks in the crystal or the watch band. • the strap or bracelet is securely fastened to the watch case.
10 7S26_E 10-11 TO PRESERVE THE QUALITY OF YOUR WATCH WATER RESISTANCE ● Water resistance (5 bar)* If “WATER RESISTANT 5 BAR” ● Non-water resistant is inscribed on the case back, your If “WATER RESISTANT” is not watch is designed and manuinscribed on the case back, your 5 bar WR factured to withstand up to 5 bar watch is not water resistant, and care should be taken not to get it and is suitable for swimming, yachting and taking wet as water may damage the movement. If a shower.
* Before using the water resistance 5, 10, 15 or 20 bar watch in water, be sure the crown is pushed in completely. Do not operate the crown when the watch is wet or in water. If used in sea water, rinse the watch in fresh water and dry it completely. * When taking a shower with the water resistance 5 bar watch, or taking a bath with the water resistance 10, 15 or 20 bar watch, be sure to observe the following: • Do not operate the crown when the watch is wet with soapy water or shampoo.
