User Instructions

INSTALLATION INSTRUCTIONS
ENGLISH
Code: AWO 611
Name: Surface mounted DIN 1/155 enclosure
IM611
Edition: 2 from 20.10.2020
Supercedes edition: 1 from 30.11.2017
1. Application:
Thanks to its design, the AWO611 enclosure can be used both as a stand-alone component used for mounting of all DIN rail
mounted devices and an element integrating electrical installations, e.g. CCTV, Access Control Systems (ACS), Intrusion
Detection Systems (IDS), etc. The enclosure is designed for mounting of (depending on the configuration):
1. Electric fuses of the „S” type
2. Transformers of the following series: TRP, TRZ using bracket DIN – AWO466 or AWO467
3. Power supplies of the following series:
• PS-15xxx, PS-40xxx, PS-60xxx, PS-100xxx, PS-150xxx, PS-200xxx using bracket DIN – PSDIN1 or PSDIN2
• DINxxx
4. Built-in buffer power supplies of the following series:
• PSB-25xxx, PSB-35xxx, PSB-50xxx, PSB-75xxx, PSB-100xxx, PSB-155xxx, PSB-300xxx
• PSBOC25xxx, PSBOC35xxx, PSBOC50xxx, PSBOC75xxx, PSBOC100xxx, PSBOC155xxx,PSBOC300xxx
using bracket DIN – PSDIN1 or PSDIN2
5. MEAN WELL power supplies for DIN rail of the following series:
• MDR, DR, HDR, EDR, NDR, SDR
• DRP, DRH, WDR, TDR, DRC
• DR-UPS40 (buffer module)
• DRDN20, DRDN40, DR-RDN20 (redundant modules)
6. MEAN WELL built-in power supplies of the following series:
• RS, LRS, RD, RSP, HRP, QP, AD, ADD, SCP using adapter Din DRP-03
2. Product description
Enclosure on the rear wall has holes for mounting 1 DIN rail 320mm long.
Rails are mounted directly to enclosure or on plastic brackets that allow separate rail from wall by 20mm.
Equipped with a tamper detecting the opening enclosure. Enclosure is screwed from the front, as standard option.
Front of enclosure has an embossing for a lock, which allows to assembly a lock with the same code MR027 or with a
different code MR008. Plastic 14mm spacers are added to enclosure, which allow moved it from the wall, which allows
entry cables to devices mounted in enclosure.
3. Mounting:
The enclosure should be mounted by a qualified installer, holding relevant (applicable and required for a given country)
permits and licenses for low-voltage installations.
The enclosure (+PCB) shall be mounted in confined spaces with normal air humidity (RH=90% max. without condensation)
and the temperature from -10°C to +40°C.
4. Technical parameters
TECHNICAL PARAMETERS
Battery space
2 x 17Ah /12V
Tamper protection
1x – enclosure opening
TAMPER output load- max
500mA@50 V DC
Enclosure
IP 20
Operation temperature
-10ºC÷40ºC
Relative humidity RH – max
90 [%]
External dimensions of the enclosure
W=375, H =205, D+D
1
=155+14 [-/+2mm]
External dimensions of the front panel
W
1
=380, H
1
=210 [+/- 2mm]
The number of DIN rails/ length / the number of „S” fields
D
2
= 4 or 20 [+/- 1mm]