User Instructions

1
AWOP-325PR
v.1.0
Distribution Junction Box 3x2,5mm
2
Edition: 4 from 21.05.2019
Supercedes the edition: 3 from 18.09.2014
1. Description.
The junction box for fire alarm systems is designed for connecting fire protection devices in cable
installation systems with fire resistance according to the DIN 4102-12 standard, where the uninterruptible power
supply or transmission of the signal in case of fire is required.
The junction box is designed to guarantee the mechanical ability to keep the cable routes capable of
guaranteeing the uninterruptible power supply and transmission of telecommunication signals in the fire zone.
The junction box can be used for power supply of fire protection equipment, such as ventilators and smoke
vents, fire alarm control panels, emergency warning systems, etc.
Juction box enable to connect and split 3 wires cable.
Table 1. Elements of the junction box.
Component
No.
Description
[1]
Mounting holes for mounting to a surface.
[2]
Cable glands.
[3]
Protection connector PE.
[4]
Connection sockets.
Fig.1. The junction box and wiring diagram.
EN*