Data Sheet

Table Of Contents

DESTINATION

The transformers are destined for supplying devices requiring AC voltage U1 or U2. (intercom, electric

strike)

DANE TECHNICZNE

Casing

Dimensions: fig.1

Weight net/gross: 0,58kg / 0,63kg [+/-0,1kg]

Installation: - cheese screw

Supply voltage: 230 V (-15%÷ 10%), 50Hz

Current consumption I: tab.1.

Output voltage U1/U2: tab.1.

Rated power S: tab.1.

Rated output current I1/I2: tab.1.

Over-load protection t: ressetable fuse 130°C

Operating conditions: 2nd environmental, -10°C÷ 40°C, Ta 40B

Certyficates, declarations: CE, RoHS, 2 year from the production date

Cable length: AC 230 V- 160cm, AC 11,5 V AC 14 V- 100cm

Remarks:

: IP64

Technical parameters of transformers: AWT 027

COD

NAME

U1 or U2

I1 or I2

AWT027

10VA/11,5 V/14 V

10VA 230 V 0,06 A 11,5 V or 14 V 0,8 A or 0,6 A 130

Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, www.zasilacze.pl e-ail:sales@pulsar.

Transformer

CODE: AWT 027 v 1.0/III

NAME: Transformer 10VA/11,5V/14V

IP64

Tab.1

Pulsar

PAGE 1
Pulsar Transformer CODE: NAME: AWT 027 v 1.0/III Transformer 10VA/11,5V/14V IP64 Tab.1 Technical parameters of transformers: AWT 027 COD NAME S U I U1 or U2 I1 or I2 t AWT027 10VA/11,5 V/14 V 10VA 230 V 0,06 A 11,5 V or 14 V 0,8 A or 0,6 A 130°C DESTINATION The transformers are destined for supplying devices requiring AC voltage U1 or U2.
PAGE 2
63mm TRANSFORMER 10VA IP64 DATE: 2011-07-07 www.pulsar.pl MANUFACTURED FOR 11.5V/0.8A Yellow-Blue 14V/0.6A Yellow-Red POWER: 10VA TYPE: MH027 INPUT (PRI): 230VAC 50Hz OUTPUT (SEC): Transformer Pulsar Dimensions: 80mm 68mm 49mm 35mm 1600mm 1000mm fig.1 Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, www.zasilacze.pl e-ail:sales@pulsar.