User Instructions

3
4. Technical description
After providing the S triggering signal for longer than the set T1 time, the relay will be activated for the T2 time
period.
- After providing the S triggering signal for longer than the set T1 + T2 times, the switch will turn on after the T1
time and hold until the control signal disappears.
- Control signals shorter than T1 time are ignored and do not activate the relay.
- Providing a reset signal when turning on the relay causes its immediate shutdown.
Fig.2 Time diagrams of the module.
Pulsar
Siedlec 150, 32-744 Łapczyca, Poland
Tel. [phone], Fax [phone]
E-mail: [e-mail], [e-mail]
http:// www.pulsar.pl, www.zasilacze.pl
WEEE LABEL
According to the European Union WEEE Directive, waste electrical and electronic equipment should be disposed of separately from
normal household waste. Waste electrical and electronic equipment must not be disposed of with normal household waste.