User Instructions

AWZ533
v2.1
LB4P/4x1,5A/FTA
Fuse module
Edition: 6 from 10.04.2018
Supersedes: 5 from 20.10.2014 EN**
Description.
The LB4P/4x1.5A/FTA fuse module is designed for power distribution in low-voltage systems requiring voltage of 10V÷30V
DC or 10V÷24V AC (e.g. buffer power supply, transformer etc.). It has 4 independent, galvanically isolated power supply circuits
protected with 1,5A fuses. Fuse activation is indicated by switching off the appropriate LED: L1 for AUX1, L2 for AUX2 etc. Additionally,
each output is protected with a varistor protecting the power supply and receivers against surges in the supply system. The module is
adapted for connection of wires with a maximum cross-section of 1mm
2.
.
Fig.1. The view of the module.
Fig.2. Electrical diagram.
Table 1. Description of components and
connectors of the module.
Element
no.
[fig.1]
Description
[1]
IN1 ÷ IN4 – module’s supply
inputs
[2]
F1 ÷ F4 fuses in the AUX (+)
circuits
[3]
AUX1 ÷ AUX4 independently
protected outputs (galvanically
isolated)
[4]
Green L1 ÷ L4 LEDs
[5]
Mounting panel
Table 2. Specifications.
Supply voltage
10V ÷ 30V DC (-2%/+2%)
10V ÷ 24V AC (-2%/+2%)
Output voltage
U
AUX
= U
IN
(equal to supply voltage)
Current consumption
5 mA ÷ 30 mA @ U
IN
= 10V ÷ 30V DC
Number of power inputs
4 (IN terminals) – max. 1mm
2
cable
Number of power outputs
4 (AUX terminals) – max. 1mm
2
cable
Protections against:
- a short circuit SCP
- an overload OLP
- a surge
- 4 x 1,5A
- 4 x 1,5A
- varistors
LED indication
Green L1 ÷ L4 LEDs – AUX1 ÷ AUX4
output status
Fuses F1 ÷ F4
F 1,5A
Operating conditions
II environmental class, -10°C ÷ 50°C
Dimensions
L=100, W=43, H=20 (+/-2mm)
Installation
A mounting panel with an adhesive
tape,mounting screws x2 (holes 3mm)
Connectors:
- power supply
input/output
Ф0,41÷1,63 (AWG 26-14) 0,2 ÷ 1mm
2
Declarations, warranty
CE, 2 year from the production date
Net/gross weight
0,05kg / 0,08kg
Pulsar
Siedlec 150, 32-744 Łapczyca, Polska
Tel. [phone], Fax. [phone]
e-mail: [e-mail], [e-mail]
http:// www.pulsar.pl, www.zasilacze.pl
WEEE PARKING
According to the EU WEE Directive – It is required not to dispose of electric or electronic waste as unsorted municipal waste
and to collect such WEEE separately.