User Instructions

Supply voltage
10V÷ 30V DC
Output voltage
U
AUX
= U
IN
(equal to supply voltage)
Current consumption
5 mA÷ 30 mA @ U
IN
= 10V ÷ 30V DC
Number of power inputs
2: a DC 5,5/2,1 outlet or a screw connector
Number of power outputs
4 (AUX terminals)
Protections against:
- a short circuit SCP *
- an overload OLP
- a surge
- 4 x 1A PTC
- 4 x 1A PTC
- varistors
LED indication
Green LEDs L1 ÷ L4 – outputs status
AUX1÷AUX4
F1 ÷ F4 fuses
4 x 1A PTC
Operating conditions
II environmental class, -10°C ÷50°C
Dimensions
L=80, W=43, H=21 (+/-2mm)
Fixing
a mounting tape or dowel pins x2
(holes3mm)
Connectors:
- of power output
- of power input
- screw connectors Ф0,41÷1,63
(AWG 26-14)
- a DC 5,5/2,1 outlet or a screw connector
Ф0,41÷1,63 (AWG 26-14)
Net/gross weight
0,03kg / 0,05kg
Declarations, warranty
CE, 2 year from the production date
AWZ575
v1.0
LB4/1A/PTC
Fuse module
Edition: 5 from 10.04.2018
Supersedes edition: 4 from 06.09.2016
1. Technical description.
The fuse module is intended for dividing power in low-voltage alarm systems (power distribution) that require
voltage within the range of: 10V ÷ 30V DC. It contains two power inputs: a screw connector and a DC 5,5/2,1 outlet and
four power outputs AUX1÷AUX4 which are independently secured with PTC 1A polymer fuse. An activation of the PTC
fuse is indicated by an appropriate LED going out: L1 for AUX1, L2 for AUX2 etc. Additionally, each output is secured by
a varistor which protects the PSU and the receivers against surges in the power circuit.
Fig.1. Drawing of the module.
PSU
10 V 30 V DC
1A PTC
1A PTC
PSU
10 V 30 V DC
Rys.2. Electrical diagram.
Table 1. Description of components and
connectors of the PSU.
* Using power supply unit with too low current
efficiency may cause (in the case of a short-circuit
at one of the outputs of the module) temporary
power loss at other outputs.
Table 2. Specifications.
EN
Element
no. [fig. 1]
Description
[1]
L1 ÷ L4 green LEDs
[2]
F1 ÷ F4 fuses in the AUX (+)
circuits
[3]
AUX1 ÷ AUX4 independently
secured outputs,
common terminal COM (-)
[4]
DC 5,5/2,1 outlet – module’s
power input
[5]
Screw connector – module’s
power input
[6]
Mounting strip
Pulsar
Siedlec 150, 32-744 Łapczyca, Polska
Tel. [phone], Fax. [phone]
e-mail: [e-mail], [e-mail]
http:// www.pulsar.pl, www.zasilacze.pl
WEEE MARKING
According to the EU WEE Directive – It is required not to dispose of electric or electronic waste as unsorted municipal waste and to collect such
WEEE separately.