User Manual

10
Clear DTC’s
STEP 1 - Access the programming menu.
STEP 2 - Using +RES or -SET, select mode 40 (MPH)
STEP 3 - Press cancel cruise to select.
STEP 4 - The speedometer will sweep to 140 MPH, indicating the function is
complete.
Axle Ratio
Input Stock and Modied Axle Ratio.
STEP 1 - Access the Programming Menu.
STEP 2 - Using the +RES or -SET, select mode 30 (MPH)
STEP 3 - Press cancel cruise to select.
STEP 4 - Enter Stock Axle Ratio.
Example: 3.73 Axle- Whole Number = 3, Decimal = 73
a. Using +RES or -SET, adjust to the Stock Axle Whole number.
b. Press cancel cruise to save the input.
c. Using +RES or -SET, adjust the Stock Axle Decimal number.
d. Press cancel cruise to save the input.
STEP 5 - Enter Modifed Axle Ratio.
a. Using +RES or -SET, adjust to the Modied Axle Whole number.
b. Press cancel cruise to save the input.
c. Using +RES or -SET, adjust the Modied Axle Decimal number.
d. Press cancel cruise to save the input.
STEP 6 - The speedometer will sweep to 140 MPH, indicating the function is
complete.
Manual Regeneration
Manual regeneration allows you to manually clear out the Diesel Particulate
Filter (DPF). Completing a manual regeneration cycle will clear the soot mass in
the lter, and lower exhaust back pressure to improve exhaust ow. The engine
must be at operating temperature.
1 - Park the vehicle outdoors and keep people, other vehicles, and
combustible materials away from it.
2 - Do not leave the vehicle unattended.