User Manual

Clear DTC’s

STEP 1 - Access the programming menu.

STEP 2 - Using +RES or -SET, select mode 50 (MPH)

STEP 3 - Press cancel cruise to select.

STEP 4 - The speedometer will sweep to 140 MPH, indicating the function is

complete.

DFM/AFM (Dynamic/Active Fuel Management)

Disabling DFM will automatically disable Auto Start/Stop

STEP 1 - Access the programming menu.

STEP 2 - Using +RES or -SET, select mode 60 (MPH).

STEP 3 - Use the +RES or -SET wheel to adjust to the desired value.

a. 0 = DFM/AFM is active

b. 10 = DFM/AFM is disabled

STEP 4 - Press the cancel cruise control button to save the input value.

STEP 5 - The speedometer will sweep 0 to 140 MPH indicating the function is

complete.

Responsiveness Level Adjustment

When the vehicle is running and cruise control is turned o󰀨, the vehicle throttle

responsiveness can be adjusted. The responsiveness level is indicated using the

vehicle’s speedometer.

STEP 1 - Using the +RES or -SET, adjust to the desired value. The levels

changing will be shown on the speedometer, from 10 MPH to 50 MPH.

Level 0 = Stock

Level 1 = Reduced responsiveness (up to 15% less than stock)

Level 2 = Increased responsiveness (up to 15% over stock)

Level 3 = Increased responsiveness (up to 30% over stock)

Level 4 = Increased responsiveness (up to 48% over stock)

Level 5 = Increased responsiveness (up to 65% over stock)

STEP 2 - To recall the vehicle’s performance level, press the cancel cruise

control button.