User Manual

7
Pulsar LT Installation Cont’d
STEP 5 - Reconnect Negative Terminal on battery.
NOTE: If needed, use supplied Zip Ties to secure excess wires asside.
STEP 4 - Use supplied Velcro
to mount the Pulsar LT to
the top of the battery cover
(see page 6 for battery cover
location).
Note: Clean the top of the
battery cover to ensure a
strong bond with the Velcro.
Remove the clear lm from the
Velcro and place both Velcro
strips on the bottom of the
Pulsar LT, then press rmly to
the battery cover.