Data Sheet

DINB13850 v.1.0/III
DINB 13,8V/5A DIN rail buffer power supply.
CODE:
TYPE:
EN**
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
Power supply series DINB
Buffer power supply 13,8V DC, on a DIN rail
DESCRIPTION
The buffer power supply is designed for uninterrupted supply of devices requiring stabilized voltage of 12V
DC (+/-15%). The PSU supplies voltage of 13,8V DC with current efficiency of I = 5A + 0,5A battery charging*.
In the case of mains power failure, the unit will instantly switch to battery power. The PSU is fitted with short
circuit protection and overload protection. The power supply unit is in plastic enclosure designed for DIN TH35
rail mounting (35mm width).
During normal operation, the total current drawn by the device cannot exceed I=5A. The maximum
battery charging current is 0,5A. The total current of the receivers + battery is max. 5,5A*.
PSU features:
· DC 13,8V/5A* uninterrupted supply + 0,5A
battery charging current
· universal supply voltage range AC 176÷264V
· high efficiency 85%
· battery charging and maintenance control
· deep discharge battery protection (UVP)
· battery output protection against short circuit
and reverse polarity connection
· DIN rail mounting
· LED optical indication
· protection type:
· short-circuit protection SCP
· surge protection
· overload protection OLP
· warranty – 2 years from the production date
RECEIVER
CCTV cameras, detectors
signaling dev., etc.
12V/DC
(9÷14V/DC)
230VAC
+
-
BATTERY
12V/7Ah
AC
DC
BAT
BAT
OUTOUT
MODEL: DINB13850
INPUT: 200 240V ÷ ~ 50/60Hz
OUTPUT: 13,8V 5A
RoHS
CHARGE: 13,8V 0,5A
LN
www.pulsar.pl
AC
DC
BAT
* Refer to chart 1
Pulsar
®
H
L
W