Operating instructions

www.pulsar.pl EN54-2A17LCD RED POWER
32
7.2.6. Setting the transmission parameters applies to cooperation with PowerSecurity.
All the parameters responsible for communication between the PSU and the computer, namely the
address, parity and speed should have the same settings for both the PSU and the PowerSecurity program.
The PSU has preset transmission parameters of 115200 baud 8E1; if these values were changed, they
should be restored to original settings.
- use the „<” or „>” buttons to display the Transmission menu
- press the „SET” button, the prompt will appear at the end of the line
- use the „<” or „>” buttons to set the transmission speed
- 9.6k 8N1
:
- 115.2k 8E1 (factory setting)
:
- 115.2k 801
- confirm by pressing the „SET” button