Operating instructions

www.pulsar.pl EN54-2A17LCD RED POWER
33
7.3. Control panel.
The menu is only available after entering the correct user’s or service password.
The „control panel” menu enables configuration of the settings directly related to the user interface. It is
possible to set the display language, date, time, intensity of the backlight and blinking light indicating failure.
Setting the correct date and time is important for keeping chronology of events stored in the internal
memory. Setting the backlight mode and contrast guarantees the quality of the displayed messages.
Intensity of the LCD backlight can be set in the range from 0 to100%, in 10% intervals.
The display features a function of constant or temporary backlight mode. In temporary mode, the screen will turn off
if no buttons are pressed within 60 seconds.
Fig. 26. „Control panel” screen.
Table 14. The description of the „Control panel” screen.
Position Description
Language Available languages
Date Current time
Time Current date
Backlight mode 60s - backlight mode OFF if no buttons are pressed within 60 seconds
constant - the backlight will not be turned off
0÷100% - the intensity of the backlight
Contrast 0÷ 100% - the display contrast
Blinking light indicating
failure
YES –blinking light indicating failure
NO – constant light indicating failure