Operating instructions

www.pulsar.pl EN54-2A17LCD RED POWER
35
7.3.3. Setting the time
The „Time” menu in the „Control panel” menu enables setting the correct time, according to which error
messages and operation history will be saved. Built-in real time clock does not take into account leap year and the
changes resulting from the switch between summer and winter time. These changes should be taken into account
when analyzing events recorded in the history.
- use the „<” or „>” buttons to display the Time menu
- press the „SET” button, the prompt will appear
next to the hour digits
- use the „<” or „>” buttons to set the hour
- press the „SET” button, the prompt will appear
next to the minute position
- use the „<” or „>” buttons to set the minutes
- press the „SET” button, the prompt will appear
next to the seconds’ position
- use the „<” or „>” buttons to set the seconds
- confirm by pressing the „SET” button
7.3.4. Setting the backlight mode.
The „Backlight” menu dims the display if no buttons are pressed within 60 seconds and sets the intensity of
the backlight.
- use the „<” or „>” buttons to display the Backlight mode menu
- press the „SET” button, the prompt will appear next to the constant< option
- use the „<” or „>” buttons to change the setting to
60 s