FORWARD DN55 DIGITAL NIGHT VISION
PACKAGE CONTENTS • Digital module Monocular Pulsar 10x32 Protective covers 915 nm attachable laser IR Illuminator Spare battery container Wireless remote control Plastic case / Carrying case** Video cable User manual Lens cloth Warranty card SPECIFICATIONS MODEL Optical characteristics Generation Optical magnification, x Optical magnification of the digital module, x Lens Field of view, degree / m (at 100m distance) Exit pupil, mm Resolution, lines/mm, at least Max.
9 COMPONENTS AND CONTROL ELEMENTS 1 8 11 Lens cap 2 Lens focus knob 3 Video output 4 Knob for attaching the laser IR Illuminator on digital module 5 Encoder 6 Knob for activating and adjusting power of IR laser Illuminator 7 On/Off button 8 Battery container lever 9 “Power” jack connection to external power supply 26 16 15 14 10 Lock 11 Battery сontainer 10 12 Laser IR Illuminator lens holder 13 Laser IR Illuminator locking ring Wireless remote control: 14 “ON” button 15 “IR” butto
GUIDELINES FOR OPERATION The device was designed for extensive usage. To ensure longevity and performance, please adhere to the following: • Before use make sure that you have installed the digital module according to the instructions of the section 8. • Store with the lens cap on in the carrying case. • Switch off the unit after use. • The unit cannot be submerged in water.
MOUNTING THE DIGITAL MODULE ON OPTICAL DEVICE The digital module can also be mounted on a day optical device, mounting procedure is as follows: Choose an adapter with an insert of the required diameter depending on the outer diameter of the bell of the daylight device. The figures 42 mm, 50 mm, 56 mm in adapter's model name correspond to the optical diameter of the device’s bell.
When finished, turn off the device by pushing the “ON” button (7). Close the lens cap (1).
To start using the wireless remote control you will need to activate it: • Turn on the unit, press the encoder for two seconds to enter the menu, select icon. • Press the encoder (5), a message “WAIT” will show up and countdown will start within which you need to press any button of the RC. • If the activation is successful, the message “COMPLETE” will show up next to icon. The RC is ready for use. • If the message “ERROR” shows up, repeat the procedure. If the RC does not work, replace the battery.
problem possible cause(s) corrective action The device will not turn on. Batteries have been wrongly installed. Oxidized contact points in the battery compartment due to “leaky” batteries or contact points becoming exposed to a chemicallyreactive solution. The batteries are empty. Reinstall the batteries with the correct polarity orientation. Clean the battery compartment, focusing on the contacts. The image is blurred.