User Instructions

ManualsBrandsPulsar Manuals13HPSB 13,8V/10A/40Ah buffer, switch mode power supply unit

HPSB 11A12D

v.1.0

HPSB 13,8V/10A/40Ah

Buffer, switch mode power supply unit.

EN*

Edition: 8 from 24.10.2016

Supersedes edition: 7 from 11.08.2014

Summary of content (8 pages)

PAGE 1
HPSB 11A12D v.1.0 HPSB 13,8V/10A/40Ah Buffer, switch mode power supply unit. EN* Edition: 8 from 24.10.2016 Supersedes edition: 7 from 11.08.
PAGE 2
www.pulsar.
PAGE 3
www.pulsar.pl HPSB11A12D GREEN POWER 7. Buffer power supply unit 13,8V/2x12V/8x1A/40Ah. - HPSB11A12D + 2xRN500(13,8V/12V) + 2xLB4 8x1A (AWZ575 or AWZ576) + 40Ah 8. Buffer power supply unit 13,8V/5x5V÷7,4V/5x2A/40Ah. - HPSB11A12D + 5xDCDC20 (5V÷7,4V/5x2A) + 40Ah 9. Buffer power supply unit 13,8V/5x5V÷7,4V/10x1A/40Ah. - HPSB11A12D + 5xDCDC20 (5V÷7,4V/5x2A) +5xLB2 10x1A (AWZ585 or AWZ586) + 40Ah 1.2 Block diagram (fig.1) Fig.1. The block diagram of the PSU. 1.
PAGE 4
www.pulsar.pl HPSB11A12D Fig.2. The view of the PSU.
PAGE 5
www.pulsar.pl HPSB11A12D GREEN POWER 1.4 Specifications: - electrical parameters (tab.3) - mechanical parameters (tab.4) - operation safety (tab.5) - operating parameters (tab.6) Electrical parameters (tab. 3). PSU type Mains supply Current up to Power frequency Supply power Efficiency Output voltage A (EPS - External Power Source) 176÷264V AC 1.4A@230VAC 50÷60Hz 155W max.
PAGE 6
www.pulsar.pl GREEN POWER HPSB11A12D Operation safety (tab.5). Protection class PN-EN 60950-1:2007 Protection grade PN-EN 60529: 2002 (U) Electrical strength of insulation: - between input input and output circuits of the PSU (I/P-O/P) - between input circuit and PE protection circuit (I/P-FG) - between output circuit and PE protection circuit (O/P-FG) Insulation resistance: - between input circuit and output or protection circuit Operating parameters (tab.6).
PAGE 7
www.pulsar.pl HPSB11A12D GREEN POWER 2.2 Installation procedure. 1. Before installation, cut off the voltage in the 230V power-supply circuit. 2. Mount the PSU in a selected location and connect the wires. 3. Connect the power cables (~230Vac) to L-N clips of the PSU. Connect the ground wire to the clip marked by the earth symbol PE. Use a three-core cable (with a yellow and green PE protection wire) to make the connection.
PAGE 8
www.pulsar.pl HPSB11A12D GREEN POWER WEEE LABEL Waste electrical and electronic equipment must not be disposed of with normal household waste. According to the European Union WEEE Directive, waste electrical and electronic equipment should be disposed of separately from normal household waste. CAUTION! The power supply unit is adapted for cooperation with the sealed lead-acid batteries (SLA). After the operation period they must not be thrown but recycled according to the applicable law. Pulsar sp. j.