Data Sheet

HPSBOC 2512B v.1.1/VIII
HPSBOC 13,8V/2A/7Ah/OC B ,
with technical outputs.
uffer switch mode power supply unit
CODE:
TYPE:
DESCRIPTION
A buffer PSU intended for uninterrupted supply to devices that require stabili ed voltage of 12V DC (+/-15%).
The PSU provides voltage of U=13,8V DC with output current of I=2A + 0,5A for battery charging . In case of
power decay, a battery back-up is activated immediately. The PSU is constructed based on the switch mode PSU,
with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which can accommodate a
7Ah/12V battery. A micro switch indicates door opening (front cover).
z
*
During normal operation, the total current drawn by the equipment may not exceed I = 2 A*.
Maximum battery charging current: 0.5 A*. Total device current + battery: 2.5 A max*.
EN
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
Pulsar
®
HPSBOC series power supply unit
Buffer, switch mode power supply unit 13,8V DC with technical outputs.
Features:
· DC 13,8V/2A uninterruptible power supply*
· fitting battery: 7Ah/12V
· wide range of mains supply: 176÷264V
· high efficiency 74%
· battery charging and maintenance control
· excessive discharging (UVP) protection
· battery charge current 0,5A
· battery output full protection against short-circuit
and reverse polarity connection
· LED indication
· EPS technical output indicating AC power loss
– OC and relay type
· PSU technical output indicating PSU failure
– OC and relay type
· LoB technical output indicating battery low voltage
– OC and relay type
· protections:
· SCP short-circuit protection
· OVP overvoltage protection
· overvoltage protection
· against sabotage
· overload protection (OLP)
· warranty – 2 year from the production date
GREEN POWER plus
* See chart 1
W
H
D
W
1
H
1
D
1