Data Sheet

INTE-C v.1.0/II
Interface ETHERNET EN54C-LCD
CODE:
TYPE:
EN
Interface
DESCRIPTION
The Ethernet INTE-C interface is intended for cooperation with PSUs of the EN54C-LCD series.
The PowerSecurity software enables remote monitoring of parameters through a cyclical preview of the current
status of the power supply, reading the event log and diagrams of currents and voltages and performing remote
battery test.
Features:
· connection to ETHERNET network via RJ45 connector
· permission of Scientific and Research Centre for Fire Protection - National Research Institute for use with
power supplies of EN54C-LCD series
· automatic email notifications of PSU malfunctions
· compliance with IEEE 802.3 standard
· 10/100 Mb/s transmission speed
· full-duplex or half-duplex operation (auto-negotiation)
· galvanic isolation between the Ethernet interface and the power supply
· power supply via „SERIAL” socketc
· cooperation with the PowerSecurity web application
· optical indication
· warranty: 3 years from production date
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
Power supply
3,3V power through SERIAL outlet
Power consumption
max 0,4W
TTL transmission’s speed
max 115200 bauds, with parity check
LAN transmission’s speed
10/100Mbps (auto-negotation)
Optical indication
PWR – supply voltage indication (red LED)
LINK_ETH – Ethernet port connected (green LED)
TX – data transmission (yellow LED)
RX – receiving data (green LED)
Operating conditions
humidity -10
o
C ÷ 40
o
C
relative humidity 20%...90%
Dimensions (LxWxH)
71 x 50 x 20 [mm]
Net / gross weight
0,03kg / 0,09kg
Storage temperature
-20ºC...+60ºC
Other
Permission of Scientific and Research Centre for Fire Protection -
National Research Institute for use with power supplies of
EN54C-LCD series