User Instructions

www.pulsar.pl INTE

3. Installation.

The Ethernet interface should be mounted inside the enclosure of the PSU. The connection between the

power supply with Ethernet interface and the router should be made with a twisted pair with RJ45 connectors. The

role of the access point controlling the data flow is done by a router connected to a PC via Ethernet cable.

Fig.2. Schematic diagram of Ethernet network communication.

Interface installation:

1. Install the Ethernet interface in the enclosure of the PSU.

2. Connect the „SERIAL” sockets on the interface module and on the PCB of the power supply using the

included cable.

3. Plug the RJ45 connector of the twisted pair into the Ethernet interface. Plug the other end of the twisted

pair to the router "LAN" socket.

4. The router ("LAN" socket) should be connected to the network card of the computer using a RJ45 - RJ45

cable.

Fig.3. Connection diagram of the INTE interface.